Belmont 10 fibreglass pool

10.16 by 4.43 m, 45,000 L, sloping floor, 1.00 m at the shallow end to 1.80 m at the deep end. Australian made, and it comes as a complete kit: the shell, the equipment that runs it, the engineering pack and freight to your site.

Length	10.16 m
Width	4.43 m
Depth	1.00 m to 1.80 m
Water volume	45,000 L
Shape	Belmont, a curved shape with a generous shallow end and a gradual entry
Colours	Any of the twelve, at the same price
Warranty	25-year structural on the shell

Delivered kits from $28,000 to $37,000 inc GST, depending on where it is going. That is the shell in any of the twelve colours, the Essentials equipment package, the engineering pack with your state's certificate and freight to your site. See the price for your postcode.

Will a Belmont 10 fit in your yard?

The shell is 10.16 by 4.43 m. Allow about a metre around it to dig and to work, which puts the hole and its working room at roughly 12.2 by 6.4 m. Add a walkable surround and the finished area is about 13.2 by 7.4 m, which is roughly 53 square metres of paving or grass around the water.

At 4.43 m across, this one is a crane job on nearly every suburban block. Worth getting the crane question answered before anything else.

Setbacks are the other half of it. As a working rule leave at least a metre between the water and the fence, and your certifier confirms the exact figure for your block. Drop a Belmont 10 onto your own block and you will know in about a minute.

The water

At 45,000 L it is a big body of water. The pump, the filter and the chlorinator all step up to suit it, and so does the heater if you want one. Sloping floor, 1.00 m at the shallow end to 1.80 m at the deep end.

What comes with it

Every pool is one kit: the Australian-made shell in your colour, the equipment package you pick, the engineering pack with your state's certificate, and freight from our yard at Taree. You or your builder install it, or in New South Wales and Queensland our licensed crew can, priced after we have looked at your block. See what is in the kit, or what each piece of equipment does.

Belmont photos

Photos of the Belmont range. Ask us for photos of this size if we have them.

Other sizes in the Belmont range

All about the Belmont or see the whole range.

Common questions

How much yard do I need for a Belmont 10?

The shell is 10.16 by 4.43 m. Allow about a metre around it to dig and work, so roughly 12.2 by 6.4 m of clear space, and about 13.2 by 7.4 m once you have a walkable surround. The yard planner drops it onto the satellite view of your own block at true scale.

How deep is the Belmont 10?

It has a sloping floor, 1.00 m at the shallow end to 1.80 m at the deep end. Water volume is 45,000 L.

How much does a Belmont 10 cost?

The kit is $28,000 to $37,000 inc GST delivered, depending on where it is going. That is the Australian-made shell in any of the twelve colours, the Essentials equipment package, the engineering pack with your state's certificate and freight to your site. Excavation, crane, trades, fencing and paving are yours or your builder's.